If you build or remodel in Weston or anywhere in Broward County, you are building in one of the most demanding wind environments in the United States. The rules that come with that are not paperwork for its own sake — they are the reason well-built South Florida homes come through hurricane seasons with their roofs and windows intact. This guide explains the parts of the Florida Building Code that matter most to homeowners.
The Florida Building Code in brief
Florida adopted a single statewide building code after Hurricane Andrew exposed how much construction quality varied from place to place in 1992. Today, the Florida Building Code governs new construction, additions, alterations and repairs across the state, and it is updated on a regular cycle. Local building departments enforce it through permits, plan review and inspections.
What is the High-Velocity Hurricane Zone (HVHZ)?
The code defines a special region — the High-Velocity Hurricane Zone — made up of Miami-Dade and Broward counties. Buildings in the HVHZ must meet additional requirements for structural design, roofing, windows, doors and other exterior components. Every city in Broward, including Weston, is inside the HVHZ.
Design wind speed
For most homes (Risk Category II buildings), the Florida Building Code sets the ultimate design wind speed in Broward County at 170 mph; Miami-Dade uses 175 mph. Higher values apply to buildings such as hospitals and emergency shelters. Engineers use this value to calculate the pressures each part of the building must resist — walls, roof sheathing, trusses, connections, windows and doors.
Windows and doors: impact-rated or protected
Openings are the most vulnerable part of a house in a hurricane. When wind-borne debris breaks a window or a door, wind pressure enters the house and can push the roof up from inside. That is why the code requires openings in the HVHZ to be protected from impact — either with impact-resistant windows and doors or with approved shutters.
When you replace windows or exterior doors, the new products must carry approval for use in the HVHZ. In practice, homeowners and contractors look for a Miami-Dade Notice of Acceptance (NOA) or a Florida Product Approval that specifically covers HVHZ use, and the product must be rated for the design pressures calculated for that opening's location on the house. Corners and upper floors see higher pressures than the middle of a wall.
Impact windows versus shutters
- Impact windows and doors protect the opening at all times, without anyone needing to install anything before a storm. They also reduce outside noise, improve security and can improve energy performance.
- Shutters — accordion, roll-down or storm panels — can be less expensive but must be deployed before each storm, and panels must be stored and handled.
Both approaches can be code compliant. Many Weston homeowners replacing original windows choose impact glass for convenience and insurance reasons.
Roofs: covering, deck and connections
Roofs fail in hurricanes in predictable ways: shingles or tiles peel off, then the roof deck is exposed, then water enters. In severe cases, the whole roof structure lifts off the walls. The code addresses each step:
- Roof coverings must be approved for the HVHZ and installed according to their approval, including fastening patterns at edges and corners.
- Roof deck attachment uses specified nail types and spacing so sheathing stays on under suction.
- Secondary water barriers reduce water intrusion if the covering is damaged.
- Roof-to-wall connections — straps and clips that tie trusses to the walls — keep the roof attached to the structure. A continuous load path carries wind forces from the roof down to the foundation.
Why this matters for remodeling
Hurricane requirements are not only for new homes. They affect remodeling in several ways:
- Replacing windows, doors or the roof requires a permit and HVHZ-approved products.
- Additions and covered patios must be designed for wind uplift and tied into the existing structure correctly.
- Removing a wall can change the way loads travel through the house and may require engineering.
- Exterior equipment — air conditioning condensers, generators — must be anchored.
Read our Broward County permit guide to understand how these items are reviewed and inspected.
Hurricane upgrades and your insurance
Florida insurers are required to offer discounts or credits for features that reduce wind loss. A wind mitigation inspection documents items such as roof covering, roof deck attachment, roof-to-wall connections, roof shape, secondary water resistance and opening protection. Upgrades made during a renovation — impact windows and doors, a new roof, better roof-to-wall connections — can improve that report. Keep product approvals, permits and inspection records; the inspector will ask for them.
Planning a hurricane-ready project
- Start with an assessment of your current openings, roof age and roof-to-wall connections.
- Prioritize — openings and roof are usually the biggest gains.
- Plan for lead times — impact windows and doors are often made to order.
- Combine projects where possible: replacing windows during a whole-home renovation avoids repairing interior finishes twice.
- Coordinate HOA approval for exterior changes such as window style, frame color and roof tile.
Common questions about hurricane code
Do I have to upgrade my windows if I am only remodeling the kitchen?
Not usually. Code requirements apply to the work you are doing. If the kitchen remodel does not touch the windows, they can stay as they are. If you replace a window or add a new opening as part of the remodel, that opening must meet current HVHZ requirements.
Are my existing accordion shutters still acceptable?
Shutters that were approved and properly installed can continue to protect your openings. What matters is that they are in good condition, that all openings are covered and that someone is available to close them before a storm. Many owners replace them with impact glass during a renovation for convenience and insurance reasons.
Is a metal roof or a tile roof better in a hurricane?
Both can perform well when the product is approved for the HVHZ and installed exactly according to its approval. The installation — deck attachment, underlayment, fastening at edges and corners — matters as much as the material. Your HOA guidelines may also limit which roof types are allowed.
Does a new roof automatically lower my insurance?
A new roof often improves insurability and may qualify for wind mitigation credits, especially when the roof deck attachment and roof-to-wall connections are documented. The actual change in premium depends on your insurer and policy.
Building and remodeling for South Florida weather
Every new home and renovation we deliver in Broward County is designed and inspected for HVHZ requirements, with product approvals and documentation kept for your insurance and future buyers. Explore our new construction and whole-home remodeling services, or request a consultation for impact windows, roofing or a complete renovation.
This article is general information. Code requirements are updated periodically; your engineer and building department have the final word for your project.



